Use pick lines and offset
Use pick lines and offset KCTangNote
Revit provides a Pick Lines option for various drawing commands.
Pick Lines uses an existing line as a reference and draws an identical line offsetting a specified distance from the reference line.
The following shows the use of Pick Lines to draw grid lines. The same technique can be followed for some other drawing commands.
Duplicate lines using "Pick Lines" (a quicker method after drawing the first grid line)
Left-click: Architecture or Structure > Datum - Grid > Draw - Pick Lines:
Change Offset to specify spacing between lines:
When moving towards a horizontal reference grid line from the below, a blue line will appear below to indicate one possible position of the new line:
When moving towards a horizontal reference grid line from the above, a blue line will appear above to indicate another possible position of the new line:
Left-click the reference grid line to fix the new line:
Move from the above of the second horizontal grid line > Left-click it to make it the new reference grid line and to fix the new grid line:
Repeat the action. All new grid lines will be 4000 mm from their own referenced grid lines:
